@ set GPIO for UART
mov r1, #GPIO_CTL_BASE
add r1, r1, #oGPIO_H
ldr r2, gpio_con_uart
str r2, [r1, #oGPIO_CON]
ldr r2, gpio_up_uart
str r2, [r1, #oGPIO_UP]
bl InitUART
@ Initialize UART
@
@ r0 = number of UART port
InitUART:
ldr r1, SerBase
mov r2, #0x0
str r2, [r1, #oUFCON]
str r2, [r1, #oUMCON]
mov r2, #0x3
str r2, [r1, #oULCON]
ldr r2, =0x245
str r2, [r1, #oUCON]
#define UART_BRD ((50000000 / (UART_BAUD_RATE * 16)) - 1)
mov r2, #UART_BRD
str r2, [r1, #oUBRDIV]
mov r3, #100
mov r2, #0x0
1: sub r3, r3, #0x1
tst r2, r3
bne 1b
#if 0
mov r2, #'U'
str r2, [r1, #oUTXHL]
1: ldr r3, [r1, #oUTRSTAT]
and r3, r3, #UTRSTAT_TX_EMPTY
tst r3, #UTRSTAT_TX_EMPTY
bne 1b
mov r2, #'0'
str r2, [r1, #oUTXHL]
1: ldr r3, [r1, #oUTRSTAT]
and r3, r3, #UTRSTAT_TX_EMPTY
tst r3, #UTRSTAT_TX_EMPTY
bne 1b
#endif
mov pc, lr |
